DIY Termite Baiting Station Kits

Description

Where it can be used?

Superway White Ant Termite Bait is recommended for use with the Superway Termite Baiting Stations however can be used in other in-ground/above ground baiting stations. It may also be placed directly into termite workings or other areas where termite presence is detected e.g. fences, poles, trees, bridges.

Instructions for Use

Superway White Ant Termite Bait is recommended for use with in-ground (and above ground) Superway Termite Baiting stations after Termites have been detected.

Superway baiting stations are designed to intercept foraging termites with a food source attractive to Termites and to concentrate the Termites feeding in the stations. The Termite Bait is only applied to the baiting stations after termites have been detected and are there in sufficient numbers (approx 1 cupful as a guide). The more you feed, the quicker the colony’s destroyed.

A 500g container of White Ant Termite Bait contains sufficient ingredients for up to 5 TREATMENTS of active Bait stations. Extreme care must be taken not to disturb the nest/feeding termites to ensure the best possible outcome. If disrupted, the Termites will leave and relocate elsewhere.

Wear disposable latex gloves so that no odors or smells that may deter termite feeding are transferred to the bait matrix.

It may be necessary to undertake a further treatment after a month or so, however, if unsure, please do not hesitate to contact us directly for advice

Steps for DIY Termite Baiting Station

Step 1. Measure 100g of the bait powder into a suitable container. (eg empty bucket/icecream container)

Step 2. Add 300-400 ml of clean water to the powder. Mix the water and powder together to form a paste. Additional water can be used if conditions are hot and dry.

Step 3. Pour the paste into the top of the bait station or cover.

DIY Termite Kits